Systems

EC Edge 1000

EC Edge 1000

The EC Edge 1000 8” Face Gravel Stop System is a continuous cleat system with segments spanning 10’-12’ to satisfy any length requirements. The EC Edge 1000 is ES 1 tested for an 8” face and has a smooth surface with various standard and custom color options available.

Installation of the EC Edge 1000 terminates a rubber roof with a 20 gauge galvanized cleat on the perimeter edges (versus a stripped-in gravel stop system). With the EC Edge 1000, the rubber roof membrane folds over the roof edge, and the gravel stop system cleat becomes the roof termination making it water tight. The components of this system ensure the roof is buttoned up until the fascia is installed. After installation of the cleat, the fascia can then be snapped on over the face by hooking onto the bottom of the cleat and pulling back toward the roof (versus pushing straight down with other systems) to provide continuity of the building envelope.

System Downloads

EC Edge 1000 Product Data

System
Download

“In our ever-so technical and demanding industry, a company like mine is constantly searching for a turn-key and reliable partner when tackling the most difficult projects. East Coast Metal Systems fits that exact need. The expertise and professionalism they prove all the way from bid phase to the close-out of a project is bar none. I look forward to our continued success with a partner like ECMS."

Eva L | Chereco Company, Inc.

News & Announcements

View News & Announcements

ECMS Vice President Presents at MetalCon

Congratulations goes to the Vice President of East Coast Metal Systems (ECMS), John Trifonoff, who was invited to speak at MetalCon this year. MetalCon is the only annual international event…

MCA Announces MCM Alliance

East Coast Metal Systems (ECMS) is an active member of the Metal Construction Association (MCA) with Engineering Manager, John Hyde, on the Technical Committee. The MCA recently announced the formation…

Leadership West Virginia Tours ECMS

On Thursday, August 1, East Coast Metal Systems (ECMS) welcomed the 2019 class of professionals from Leadership West Virginia to tour its 60,000-square-foot metal fabrication facility at the Highlands in…

View News & Announcements